Questions and discussions about the hardware aspects of the TD RF modules, boards and accessories.
francois
 
Posts: 47
Joined: Tue Jun 16, 2015 6:13 am

ADC channels

by francois Tue Aug 04, 2015 11:08 am

Hello
Can we manage several ADC chanels using the TD1208 ?
Thanks
Francois
User avatar
lcheminade
 
Posts: 146
Joined: Mon May 11, 2015 7:47 am

Re: ADC channels

by lcheminade Tue Aug 04, 2015 12:41 pm

There are four channels available from PD4 to PD7 which are TX, RX, ADC0, TIM2.
francois
 
Posts: 47
Joined: Tue Jun 16, 2015 6:13 am

Re: ADC channels

by francois Tue Sep 08, 2015 8:40 am

Thanks for the answer !
BousJonas
 
Posts: 1
Joined: Wed Feb 08, 2017 1:03 pm

Re: ADC channels

by BousJonas Wed Feb 08, 2017 1:06 pm

lcheminade wrote:There are four channels available from PD4 to PD7 which are TX, RX, ADC0, TIM2.


Hello,

I know that for ADC0 the name in software actually is channel6 . But what are the channel names /numbers for the other pins?
Thanks in advance!

Kind regards, Jonas
User avatar
mstempin
 
Posts: 168
Joined: Thu May 07, 2015 9:24 am

Re: ADC channels

by mstempin Thu Feb 09, 2017 1:24 pm

  • The RF module datasheet will give you the module pin to EFM32G210F128 MCU mapping
  • The EFM32G210F128 datasheet will give you the available peripheral block multiplexing to EFM32G210F128 pin mapping
disk91
 
Posts: 58
Joined: Thu May 07, 2015 4:30 pm

Re: ADC channels

by disk91 Wed Jun 07, 2017 8:22 pm

Just because it will save time of other people, does someone looked at these documentation and is able to share the result ?
Sincerely,
Paul
Return to Hardware

Who is online

Users browsing this forum: No registered users and 22 guests