Questions and discussions about the hardware aspects of the TD RF modules, boards and accessories.
disk91
 
Posts: 58
Joined: Thu May 07, 2015 4:30 pm

TD1508 - Frequency not allowed

by disk91 Tue Feb 28, 2017 5:50 pm

Hi,
I'm getting a trap when firing a sigfox message on TD1508 here is the code :
TD_SIGFOX_RfPower(_state.currentTransmissionPower);
uint8_t m[4] = { XXX_HEADER_TEST, 0,0,0 };
TD_SIGFOX_Send(m,4,2);

Here is the result
[TRAP] Time:0.00:00:11.439 : 9:Frequency not allowed | Param:0x00000001(1)
-- TRAP DUMP --
MSP:0x00000001 LINK:0x0000902B
IRQTable:0x00000000
NVIC->IABR:0x00000000,0x00000000
HardFaultStR:0x00000000
FaultStatus:0x00000000:
Stack:0x200024E0-0x20002CC0
0x20002A70 : 20002A70 00000004 A90B0B00 20002B70
0x20002A80 : 00000004 00000012 20001B24 0000A849

Any idea ?
Return to Hardware

Who is online

Users browsing this forum: No registered users and 5 guests