TD next - Community

Hi
From release TD1202 to TD1208 the ADC1 input was rename USR3.
Is it still possible to configure the TD1208 module to be able to use the GPIO USR3 as an ADC channel input?
Thanks
Francois

Hi,

Those pin we're actually wrongly named in the TD1202 since they are not ADC inputs. ADC inputs available in the TD1208 are: TX, RX, ADC0, TIM2.

Regards.

it really is possible to connect to analog TX, RX, ADC0, TIM2.? It must be configured ARM Cortex-M3
CPU??

Think you