Questions and discussions about the hardware aspects of the TD RF modules, boards and accessories.
Archie
 
Posts: 22
Joined: Sun Feb 28, 2016 8:29 am

Check that the SF message is sent

by Archie Sun Feb 12, 2017 6:46 pm

Hello,
I try in my program to check if the message is on the sigfox network. When I am in a white area, the TD_SIGFOX_Send function always returns me 1.
How can I be sure that the message I am trying to send is sent ?

Another question: How can I simulate the white area physically?
User avatar
mstempin
 
Posts: 168
Joined: Thu May 07, 2015 9:24 am

Re: Check that the SF message is sent

by mstempin Wed Apr 12, 2017 3:11 pm

The Sigfox network is using broadcast messages, not connections, so it is not possible to know if a message has been received by the network or not.
Archie
 
Posts: 22
Joined: Sun Feb 28, 2016 8:29 am

Re: Check that the SF message is sent

by Archie Sat Jun 17, 2017 1:53 pm

Ha ok,
In fact we go into a white area. We have lot of "out of sequences". The messages do not arrive on our platform IOT, the message est lost.
Our platform IOT "Disengage sequence number" on sigfox but it is too late. It happens quite often on "h'aute-normandie". In basse normandie, It's flatter and the module works very well.

mstempin wrote:The Sigfox network is using broadcast messages, not connections, so it is not possible to know if a message has been received by the network or not.
Return to Hardware

Who is online

Users browsing this forum: No registered users and 2 guests