Questions and discussion about the geolocalization features of the TD RF modules.
rfrias
 
Posts: 1
Joined: Fri Mar 17, 2017 7:37 am

Problem programming TD1205P with SEGGER JLINK

by rfrias Fri Mar 17, 2017 7:51 am

Hello,

I'm trying to flash a TD1205P module with e-commander and a
error Jlink.PNG
error Jlink.PNG (88.61 KiB) Viewed 5297 times
error Jlink.PNG
error Jlink.PNG (88.61 KiB) Viewed 5297 times
Tiny Geccko board with SEGGER JLINK connection. When trying to remove protection it enters in an endless loop trying to read memory position 400C001C. Does anybody know what could be the reason? Please find attached an screenshot of this issue.

Thank you in advance for any clue.

Regards
User avatar
mstempin
 
Posts: 168
Joined: Thu May 07, 2015 9:24 am

Re: Problem programming TD1205P with SEGGER JLINK

by mstempin Wed Apr 12, 2017 3:30 pm

When using the eaCommander tool, please make sure that the "Debug Mode" in the main panel is set to "Out" (i.e. the black JTAG connector on top of the board wher ethe TD1205P adapter is attached), not to "MCU" (the internal EFM32 chip on the STK3300 itself, below the LCD screen).
Return to Geolocalization

Who is online

Users browsing this forum: No registered users and 8 guests