Hi all,
I'm trying to get the GPS signal with a TD1205p but I have some problems.
I have loaded the td1205P_modem_SOFT2067.bin firmware with TDloader.exe. I can acces to the device via serial:
But, when I have tryed to get the GPS signal with the AT command: AT$GPS=1,16,0,65535,1,1 I don't get any information.
also with this command: AT$GPS=1,4,900,180,2,2
I never get any GPGGA response
I don't know what i'm doing wrong, Can anybody helpme?