When there is no other category, General is the way to go.
Archie
 
Posts: 23
Joined: Sun Feb 28, 2016 8:29 am

TD1205p battery

by Archie Tue Dec 20, 2016 7:48 am

Hello,
I plugged a 3V battery on the 1.2 pin but the TD is not powered.

I saw on the TD a 2 pin should make a welding?
Attachments
TD1205 alimentation.jpg
TD1205 alimentation.jpg (3.11 KiB) Viewed 31269 times
gideonBreo
 
Posts: 6
Joined: Mon Nov 21, 2016 3:43 pm

Re: TD1205p battery

by gideonBreo Thu Feb 09, 2017 3:15 pm

Same Problem Here on multiple TD1205P !!!
yluque
 
Posts: 3
Joined: Tue Nov 03, 2015 12:51 pm

Re: TD1205p battery

by yluque Thu Feb 09, 2017 3:33 pm

Hello,
It is Chevron which is dedicated to un-passivation battery process. If you not used this process, you must to weld this chevron.
jagusti
 
Posts: 12
Joined: Mon Dec 28, 2015 11:50 am

Re: TD1205p battery

by jagusti Thu Feb 09, 2017 9:49 pm

Hi
I bought 15 td1205p and all have the same problem. It's not possible to power the device in this way.

Regards

Josep
gideonBreo
 
Posts: 6
Joined: Mon Nov 21, 2016 3:43 pm

Re: TD1205p battery

by gideonBreo Fri Feb 10, 2017 1:09 pm

So yes you must connect these 2 bits in order to power a 1205P with a Battery.

BR
jagusti
 
Posts: 12
Joined: Mon Dec 28, 2015 11:50 am

Re: TD1205p battery

by jagusti Sun Feb 12, 2017 7:20 pm

gideonBreo wrote:So yes you must connect these 2 bits in order to power a 1205P with a Battery.

BR

Yes. It works connecting the 2 bits.
Thanks for your help.

Regards
santiagolopez
 
Posts: 8
Joined: Wed Jan 25, 2017 8:58 am

Re: TD1205p battery

by santiagolopez Thu Feb 16, 2017 11:18 am

And it's possible to connect a fully charge LiPO battery? In every datasheet, the Vmax is 3,6V, but a fully charge battery drops 4,2v. It's possible to damage the TD1205p ?
Walmore
 
Posts: 9
Joined: Mon Mar 13, 2017 2:11 am

Re: TD1205p battery

by Walmore Sat Mar 18, 2017 8:08 pm

santiagolopez wrote:And it's possible to connect a fully charge LiPO battery? In every datasheet, the Vmax is 3,6V, but a fully charge battery drops 4,2v. It's possible to damage the TD1205p ?


Hello!, I have the same question, becouse I saw in a project the TD1205P supply by a Lipo battery but in the datasheet Vmax is 3.6V. Have you tried to test this?
Walmore
 
Posts: 9
Joined: Mon Mar 13, 2017 2:11 am

Re: TD1205p battery

by Walmore Sat Mar 18, 2017 8:09 pm

Have Somebody tried to supply the TD1205P by a Lipo battery?
User avatar
mstempin
 
Posts: 168
Joined: Thu May 07, 2015 9:24 am

Re: TD1205p battery

by mstempin Wed Apr 12, 2017 2:47 pm

The provided absolute maximum ratings are there because of good reasons, mainly internal components that are not guaranteed to continue working if you go beyond these values.

If you don't respect the absolute maximum ratings from the datasheet, then you are on your own!

You may put a diode in series in order to get a sufficient voltage drop, but I never tried.
Return to General

Who is online

Users browsing this forum: No registered users and 29 guests