Page 1 of 1

Documentation of ATS303

Posted: Thu Jun 02, 2016 5:24 pm
by Nico38
Hi.
I'm a new user of a TD1207 module and I'm going through the documentation.

The reference manual is pretty clear except for this ATS303 command:
SIGFOX RF pin configuration (a value between 1 and 39) does not mean much to me.

Can you give me some additional informations or a link ?
Thanks

Re: Documentation of ATS303

Posted: Fri Aug 26, 2016 12:23 pm
by mstempin
The ATS303 command is for setting the RF pin (marked as "reserved") function. This pin is internally connected directly to the RF chip and its purpose is related to advanced RF functions, such as to control an external PA (Power Amplifier), an RF RX/TX switch or provide RF low-level debug.

If you have a need for such advanced function, please contact TD directly.