When there is no other category, General is the way to go.
Nico38
 
Posts: 1
Joined: Thu Jun 02, 2016 5:12 pm

Documentation of ATS303

by Nico38 Thu Jun 02, 2016 5:24 pm

Hi.
I'm a new user of a TD1207 module and I'm going through the documentation.

The reference manual is pretty clear except for this ATS303 command:
SIGFOX RF pin configuration (a value between 1 and 39) does not mean much to me.

Can you give me some additional informations or a link ?
Thanks
User avatar
mstempin
 
Posts: 168
Joined: Thu May 07, 2015 9:24 am

Re: Documentation of ATS303

by mstempin Fri Aug 26, 2016 12:23 pm

The ATS303 command is for setting the RF pin (marked as "reserved") function. This pin is internally connected directly to the RF chip and its purpose is related to advanced RF functions, such as to control an external PA (Power Amplifier), an RF RX/TX switch or provide RF low-level debug.

If you have a need for such advanced function, please contact TD directly.
Return to General

Who is online

Users browsing this forum: No registered users and 25 guests