Questions and discussions about the software that runs on the TD RF module itself.
Posts: 7
Joined: Sat Dec 03, 2016 3:44 pm

flash error ram on TD1208 evb

by batchris Sat Apr 22, 2017 12:02 am


During flashing with TDLoaderV1.06.exe
I interrupted the transfer by cutting the power supply by mistake
Now the TD1208 on the EVB does not start;

I tried to flash with JLink.exe,

"Loadbin td1208_modem_SOFT2069.bin, 0"

But I still get the same error, see below

Can you help me ?

thank you,

Code: Select all
C:\TD\TD_RF_Module_SDK-v6.0.0\segger>JLink.exe -device EFM32G210F128 -if swd -speed 1000
SEGGER J-Link Commander V5.10c (Compiled Dec  4 2015 17:25:58)
DLL version V5.10c, compiled Dec  4 2015 17:25:20

Connecting to J-Link via USB...O.K.
Firmware: Energy Micro EFM32 compiled May 12 2011 11:17:09
Hardware version: V7.00
S/N: 440007637
License(s): GDB
Emulator has Trace capability
VTref = 3.304V

Type "connect" to establish a target connection, '?' for help
Device "EFM32G210F128" selected.

Found SWD-DP with ID 0x2BA01477
Found Cortex-M3 r2p1, Little endian.
FPUnit: 6 code (BP) slots and 2 literal slots
CoreSight components:
ROMTbl 0 @ E00FF000
ROMTbl 0 [0]: FFF0F000, CID: B105E00D, PID: 000BB000 SCS
ROMTbl 0 [1]: FFF02000, CID: B105E00D, PID: 003BB002 DWT
ROMTbl 0 [2]: FFF03000, CID: B105E00D, PID: 002BB003 FPB
ROMTbl 0 [3]: FFF01000, CID: B105E00D, PID: 003BB001 ITM
ROMTbl 0 [4]: FFF41000, CID: B105900D, PID: 003BB923 TPIU-Lite
Cortex-M3 identified.
J-Link>loadbin td1208_modem_SOFT2069.bin,0
Halting CPU for downloading file.
Downloading file [td1208_modem_SOFT2069.bin]...
****** Error: Failed to prepare for programming.
RAM check failed @ addr 0x10001000.
RAM check failed while testing 0x1060 bytes @ addr 0x1000088C.
Unspecified error -1
Posts: 7
Joined: Sat Dec 03, 2016 3:44 pm

Re: flash error ram on TD1208 evb

by batchris Sun Apr 23, 2017 3:03 pm

I reply himself

With this tutorial and a raspberry pi, I could upload "td1208_modem_SOFT2069.bin" ... spberrypi/

Return to Firmware

Who is online

Users browsing this forum: No registered users and 3 guests