Page 1 of 1

Issues registering EVB TD1208

Posted: Fri Jul 24, 2015 10:37 am
by robomotic
Hello guys!
This is my first post in the forum so I hope to have chosen the right section!
So I have received the TD1208 EVB yesterday and followed the EVB steps one by one i.e. upgrading the firmware, sending a test packet and a registration request for the cloud .
I have found the following problems which I hope somebody can help me with:
[/list]

A dump of the AT&V is here:
Telecom Design TD1208

Hardware Version: 0F

Software Version: SOFT1451

S/N: 00016766

TDID: 452001035753

ACTIVE PROFILE

E1 V1 Q0 X1 S200:0 S300:24 S301:2 S302:14 S303:1 S304:20 S305:25 S350:0 S351:327
68 S352:1 S353:10 S400:000000 S401:FFFFFF S402:0 S403:869412500 S404:14 S405:32
S406:1



I have also the module key but I think that supposed to be secret, so will not post in the forum.
Any help is welcome!

Re: Issues registering EVB TD1208

Posted: Fri Jul 24, 2015 12:12 pm
by lcheminade
Could you please try again now?

Re: Issues registering EVB TD1208

Posted: Fri Jul 24, 2015 9:28 pm
by robomotic
lcheminade wrote:Could you please try again now?


Excellent point 2 and 3 are solved now.
For the sigfox backend whom should I ask the PAC code?

Re: Issues registering EVB TD1208

Posted: Sat Jul 25, 2015 8:01 am
by lcheminade
You'll find it under the Device dashboard !

Re: Issues registering EVB TD1208

Posted: Thu Jul 30, 2015 4:03 pm
by nullpointer
Hi there,
I have a similar problem, A dump of the AT&V is here:

AT&V
Telecom Design TD1208
Hardware Version: 0F
Software Version: SOFT1291
S/N: 00015F32
TDID: 435001875753
ACTIVE PROFILE
E1 V1 Q0 X1 S200:0 S300:24 S301:2 S302:14 S303:1 S400:000000 S401:FFFFFFF S402:0 S403:869412500 S404:14 S405:32


I send the activation bytes as described but I never get past this form: https://developers.insgroup.fr/dashboards/device.html it's always telling me "OPPSSS"

any help will be appreciated

Re: Issues registering EVB TD1208

Posted: Sat Aug 01, 2015 2:24 pm
by robomotic
lcheminade wrote:You'll find it under the Device dashboard !


Awesome, I got everything working now ! Sorry for the late reply.
:shock:

Re: Issues registering EVB TD1208

Posted: Tue Apr 19, 2016 1:10 pm
by kohagan
Hi,

Attempting to get two TD1208 EVB registered, same issues as others, device details are ;
No. 1
Telecom Design TD1208
Hardware Version: 0F
Software Version: SOFT1451
S/N: 00074AFB
TDID: 528000785753
ACTIVE PROFILE

No.2
Telecom Design TD1208
Hardware Version: 0F
Software Version: SOFT1451
S/N: 000748E7
TDID: 528000325753
ACTIVE PROFILE

Any assistance appreciated.

K.

Re: Issues registering EVB TD1208

Posted: Wed Apr 20, 2016 10:01 am
by kohagan
Hi,

Experiencing same issue with two TD1208 EVB's. Cannot access device dashboard.

No. 1
Telecom Design TD1208
Hardware Version: 0F
Software Version: SOFT1451
S/N: 00074AFB
TDID: 528000785753

No. 2
Telecom Design TD1208
Hardware Version: 0F
Software Version: SOFT1451
S/N: 000748E7
TDID: 528000325753

Any assistance appreciated.

Thanks,

K.

Re: Issues registering EVB TD1208

Posted: Wed Aug 03, 2016 6:48 am
by Archie
I have a same probleme robotic.

I send the activation bytes as described but I never get past this form: https://developers.insgroup.fr/dashboards/device.html it's always telling me "OPPSSS


if I record the modem I send the activation https://developers.insgroup.fr/dashboards/device.html, I would see in the backend of SIGFOX ?

Re: Issues registering EVB TD1208

Posted: Tue Aug 09, 2016 7:57 am
by mstempin
All TD RF module EVBs are pre-registered to access the TD Dashboard service for one year. All you have to do is to go to the Dashboard and provide the board ID and key located on the sticker.

As the Sigfox backend callbacks are redirected to the TD Dashboard, you cannot access the Sigfox backend, but you get a similar display on the Dashboard under the "Raw" tab.